The most reliable steam boiler, steam generator manufacture

Molten Salt Furnace

molten-salt-furnace-heaters

Molten Salt Heaters


With oil and gas as fuel, molten salt as heat carrier, QXS series molten salt heat transfer material heaters sends the hot liquid by circulation pump to the heating using equipment, and then returns the liquid back to the furnace for heating again. It is a special industrial heater under direct liquid circulation. In a high temperature of 350 – 480 ℃, organic heat carrier cannot be used and only molten salt heat carrier can be used. The whole system is composed of heating furnace, circulation pump, melting slot. The heat carrier in the melting slot is pumped into the heating furnace by the circulation pump for heating, and then is pumped into the using equipment in a certain temperature. The heat carrier will return back into the melting slot after supplying the heat. Therefore the molten salt heat transfer material heaters uses oil and gas as fuel and the combustion is stable. It can be used under lower operating pressure and gets higher operating temperature. The heat supplying temperature is stable and can be adjusted accurately. It works stably within adjusted load section and keeps optimum thermal efficiency. It possesses the characteristics of complete operating control and safety monitoring device etc.

 

Coal Molten Salt Furnace 


Heat output: 500-35000kW  

Technical features:

  1. Most optimized in- and out-ring coil  
  2. And top coil structure  
  3. Heat absorption by large radiating surface  
  4. Lateral support for radiating section  
  5. Reinforced heat convection  
  6. Optimal design of spatial heat intensity  
  7. Fume temperature control at mouth and hearth outlet  
  8. Reinforced combustion  
  9. Grates’ optimal adjustment  
  10. Optimization of thermal efficiency  
  11. Automatic soot cleaning  
  12. Efficient and energy-saving system configuration  
  13. Frequency conversion and energy saver  
  14. Multi-furnace synchronization  
  15. Recirculation temperature control  
  16. Complemented multi-grade dedusting
  17. Waste heat recovery

Oil (Gas) Molten Salt Furnace


Heat output: 500-35000kW

Technical features:

  1. Unique coil structure at radiant section
  2. Optimal design of double- or multi-layer coil tube  
  3. And top coil structure  
  4. Heat absorption by large radiating surface  
  5. Reinforced heat convection  
  6. Optimal design of spatial heat intensity  
  7. Fume temperature control at outlet of radiating section Automation control  
  8. Combined firing  
  9. Low NOX combustion  
  10. Environmental protection control  
  11. Automatic reset of explosion door  
  12. Waste heat recovery  
  13. Reinforced heat preservation  
  14. Thermal efficiency maximization

Company Profile


Romiter Group concentrating on supply high efficient and high intelligent boiler for customer. Main products include wood pellet hot water boilers, wood pellet steam boiler, wood pellet burner, coal fired thermal oil heater, diesel oil fired thermal oil heaters, biomass steam generator(wood dust, corncob, bagasse, rice husk, palm kernel shell), coal fired hot air generator, wood pellet hot air furnace, electric steam generator, coal fired steam generator, coal water slurry steam generator, diesel oil or gas steam generator, thermal oil steam generators, heat recovery steam generator (HRSG).

 

Send Us Inquiry to Get Quotation


Your Name (*)

Email (*)

Subject

Message

X