Horizontal oil / gas hot oil heaters (thermal oil heater) is aparticular kind of forced circulation industrial heater that use light oil, gas or heavy oil as its fuel, and takes thermal oil as its medium. The pumps in the system circulates heat transfer material thermal oil to heating equipment, releasing heat there and back to boiler for reheat again. With characteristic of relatively high and stable medium temperature under low pressure, and equipped with perfect running control system and safety monitoring apparatus, it has been widely used in the shipping business that transport chemical material, heavy oil, asphalt and drying industry.
Features of Fuel Oil/Gas Thermal Hot Oil Heaters
- It is convenient to be adjusted, and can supply balanced heat to satisfy the hard work required to precise temperature.
- Liquid circulation heating, less heat loss, high thermal efficiency.
- Working medium can change volume when it was heated and release heat .and we have compensation technique measures in the system.
- We have strictly technical measures to control air, water and other low volatile matter’s content of the working medium in the circulation heating
- The series boiler have advanced program control system, equipped with liquid level controller, pressure controller, temperature controller, and alarms to make sure the boiler work orderly and safe. So it is a kind of safe boiler with high efficiency and low power consumption.
Working Principle of Fuel Oil/Gas Fired Hot Oil Heaters
Thermal oil Heater is a new type of thermal equipment, which uses coal, or oil as fuel, takes heat conduction oil as circular media for heat supply. It is the technological flow of using high temperature circular pump to actualize forced block out circulation for the heat conduction oil; the heat conduction oil shall return to the boiler for warming up after supplied heat for heat consumption equipment. Since it can get a higher working temperature (350°C approximately) under normal pressure, carry out stable heating and precisely control the working temperature, it does not need any water treatment equipment, it has higher heat efficiency in the system, convenient in performance and maintenance; it is then the kind of safe, high efficient, energy saving heat energy supply equipment.
Why choose hot oil heater
- High temperatures up to 350°C at atmospheric pressure
- Choice-free set-points of the thermal oil outgoing temperature
- Supreme part-load operations
- No risk of corrosion
- Can be used as for both cooling below 0°C and above 100°C
- Low maintenance costs (no dynamic influences, no leaking)
- Quiet in operation
- Easy to operate ( does not require boiler certified staff etc.)
- Fluid sample analyzing that determine the condition of the system
- No risk of freezing damages in cold regions.
Thermal Water & Steam Boiler requires extreme pressure in the level of high temperatures that is not economical due to high operating and owning costs. This situation paves the way for strengthening the distinctive position of Thermal Oil Boilers
Parameter Table of YYW Hot Oil Heaters
Hot Oil Heaters Delivery
Hot Oil Heaters Factory Visit
Romiter Group concentrating on supply high efficient and high intelligent boiler for customer. Main products include diesel oil steam generator, gas steam generator, Wood pellet boilers, wood chips boilers, other biomass (wood dust, corncob, bagasse, rice husk, palm kernel shell) steam generator, unfired steam generator, electric steam generator, coal fired steam generator, coal water slurry steam generator, thermal oil heaters, thermal oil steam generators, water tube steam generators, coil tube steam generators, wood pellet hot air generator, coal fired hot air generator, heat recovery steam generator (HRSG).